Candra, Susila and Firmanto, Hudiyo (2024) Analysis and Experiment of Blank Holder Gap in the Cylindrical Cup Deep Drawing of Low Carbon Steel to Prevent Cracking-Wrinkling. Journal of Mechanical Engineering, 21 (1). pp. 123-142. ISSN 1823-5514, e-ISSN 2550-164X
![[thumbnail of Susila Candra_Analysis and Experiment.pdf]](/style/images/fileicons/application_pdf.png) |
PDF
Susila Candra_Analysis and Experiment.pdf Download (4MB) |
Abstract
This paper aims to investigate Blank Holder Gap (BHG) in order to prevent wrinkles and crack defects in the deep drawing process of cylindrical cups with a diameter of 30 mm, using low carbon steel grade SPCC that is 0.7 mm thick. Mathematical and experimental approaches were applied to study the effect of BHG on wrinkle wave height and product quality. The analytical approaches used were the slab method and the Forming Limit Diagram (FLD) to determine the final thickness of the product specimen and the height of the wrinkling wave, respectively. Each method in this study had been compared to each other. Punch-die dimensions were determined based on the standard tool designed. According to the research, BHG is set 100% to 114% of the thickness of the initial material or equivalent about 0.70 to 0.80 mm. By using the value of this gap, the height of wrinkles can be avoided, the magnitude of the drawing force is still below the critical limit, and the product specimen does not experience wrinkles and cracks. The results of this study are applicable to the deep drawing of cup products on SPCC material with a thickness of no more than 1 mm
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | Blank Holder Gap; Wrinkles and Cracks; Cup Deep Drawing; Forming Limit Diagram; Drawing Force |
| Subjects: | T Technology > TS Manufactures |
| Divisions: | Faculty of Engineering > Department of Manufacturing Engineering |
| Depositing User: | Ester Sri W. 196039 |
| Date Deposited: | 16 Jan 2024 07:25 |
| Last Modified: | 19 Jan 2024 02:20 |
| URI: | http://repository.ubaya.ac.id/id/eprint/45715 |
Actions (login required)
 |
View Item |
