Items where Author is "Candra, Susila"

Article

Firmanto, Hudiyo and Candra, Susila and Hadiyat, Mochammad Arbi (2024) Rotary friction welding of 304 stainless steel: parametric study, mechanical properties, and microstructure of the joint. Jurnal Polimesin, 22 (2). pp. 191-198. ISSN 1693-5462; E-ISSN 2549-1999

Candra, Susila and Firmanto, Hudiyo (2024) Analysis and Experiment of Blank Holder Gap in the Cylindrical Cup Deep Drawing of Low Carbon Steel to Prevent Cracking-Wrinkling. Journal of Mechanical Engineering, 21 (1). pp. 123-142. ISSN 1823-5514, e-ISSN 2550-164X

Firmanto, Hudiyo and Candra, Susila and Hadiyat, Mochammad Arbi and Triastomo, Yesa Priscilla and Wirawan, Ivan (2023) Tensile Strength and Microstructure of Rotary-Friction-Welded Carbon-Steel and Stainless-Steel Joints. Jounal of Manufacturing and Material Processing, 7 (1). pp. 1-17. ISSN 2504-4494

Candra, Susila and Batan, I Made Londen and Berata, Wajan and Pramono, Agus Sigit (2016) Analisis Dan Eksperimen Blank Holder Gap Minimum Pada Proses Rectangular Cup Deep Drawing. Teknoin, 22 (5). pp. 372-382. ISSN 0853-8697

Candra, Susila and Batan, I Made Londen and Berata, Wajan and Pramono, Agus Sigit (2015) Modeling of Critical Blank Holder Force Based on a Gap Limit and Unbending Strain Energy in Deep Drawing Process. International Journal of Engineering and Technology, 7 (2). pp. 461-474. ISSN 0975-4024

Candra, Susila and Batan, I Made Londen and Berata, Wajan and Pramono, Agus Sigit (2014) Simulation of Semi-Active the Blank Holder Force Control to Prevent Wrinkling and Cracking in Deep Drawing Process. Applied Mechanics and Materials, 493 (2014). pp. 473-479. ISSN 16609336

Candra, Susila and Batan, I Made Londen and Pramono, Agus Sigit and Pramujati, Bambang (2013) Simulation of Metal Flow to Investigate the Application of Antilock Brake Mechanic System in Deep Drawing Process of Cup. Advanced Materials Research, 789 (2013). pp. 367-372.

Candra, Susila and Londen Batan, I Made (2013) Experimental Study and Analysis of the Influence of Drawbead against Restriction and Deep Drawing Force of Rectangular Cup-Cans with Tin Plate Material. Applied Mechanics and Materials Vol. 315 (2013) pp 246-251, 315 (2013). pp. 246-251. ISSN 16609336

Pratiknyo, Yuwono Budi and Candra, Susila and Tanujaya, Michael Lawrence (2011) Rancang Bangun Water Bike Sebagai Sarana Wisata dan Pengontrol Kerambah Waduk Tanjung Mojokerto. Jurnal Teknik dan Manajemen Industri, VI (2). pp. 136-144. ISSN 1978-2861

Tjandra, Sunardi and Candra, Susila (2010) Pemodelan dan Simulasi Mekanik Perancangan Dongkrak Mobil Sedan Berpenggerak Motor Listrik. Proceeding of The 9th National Conference Design and Application of Technology 2010. pp. 47-53. ISSN 1412-727x

Haryono, Yon and Candra, Susila and Gunawan, Andrew Eko and Priyadi, Edwin (2009) Modifikasi Mekanisme Unit Injeksi Pada Mesin Injeksi Plastik Manual (Tenaga Manusia) Menjndi Berpenggerak Motor listrik AC. Prosiding Seminar Nasional VIII : Rekayasa dan Aplikasi Teknik Mesin di Industri. ISSN 1693 - 3168

Candra, Susila and Haryono, Yon and Tengeara, Amelia (2009) Rancang Ulang dan Pembuatan Mold Tutup Galon Air Minum lsi Ulang dari Single menjadi Double Mold Cavity untuk Aplikasi pada Mesin Injection Manual. Prosiding Seminar Nasional VIII : Rekayasa dan Aplikasi Teknik Mesin di Industri. ISSN 1693 - 3168

Candra, Susila and Witantyo, Witantyo and Djoenaedy, Aldo Rendra (2009) Optimasi Temperatur Pemanasan Dan Holding Time Serta Media Pencelupan Terhadap Kekerasan Material SK3 Mod Dengan Metode Respon Surface. Jurnal Ilmiah Sains & Teknologi, 3 (2). pp. 67-76. ISSN 0216-1540

Suteja, The Jaya and Candra, Susila and Aquarista, Yudistira (2008) Optimasi Proses Pemesinan Milling Fitur Pocket Material Baja Karbon Rendah Menggunakan Response Surface Methodology. Jurnal Teknik Mesin, 10 (1). pp. 1-7. ISSN 1410-9867

Conference or Workshop Item

Tarigan, Elieser and Candra, Susila and Wibowo, Susilo (2024) Simulation of the Photovoltaic System Capacity to Power the Electrical Vehicles under Tropical Climate of Surabaya, Indonesia. In: 5th Talenta Conference on Engineering, Science and Technology (TALENTA CEST-5 2024), March 6-7, 2024, Medan.

Candra, Susila and Tjandra, Sunardi and Soesanti, Arum and Susanto, Herman and Widyadmoko, Thomas and Prihartono, Prihartono (2024) Development of Two Wheel Drive Electric Bikes for Extreme Road and A Long-Range Capabilities. In: 3rd International Symposium on Advances and Innovation in Mechanical Engineering (ISAIME 2022), 13/10/2022 - 14/10/2022, Makasar.

Firmanto, Hudiyo and Candra, Susila and Hadiyat, Mochammad Arbi and Haryono, Yon (2023) Influence of Friction Pressure and Friction Time Interaction on the Joint Strength of Friction Welded ST 41 Steel. In: Proceedings of the 4th International Conference on Engineering and Technology for Sustainable Development (ICET4SD 2021), 13 December 2021, Yogyakarta, Indonesia.

Tjandra, Sunardi and Candra, Susila and Saputra, Albertus Agung Jody and Putra, Yehezkiel Dandy Faraisc (2023) Design of Mid Drive Electric Cargo Bike for Urban Area. In: Proceedings of the 4th International Conference on Informatics, Technology and Engineering 2023 (InCITE 2023), 14-15 September 2023, Yogyakarta.

Firmanto, Hudiyo and Candra, Susila and Hadiyat, Mochammad Arbi and Haryono, Yon (2022) Influence of Heating Stage Parameters on the Joint Strength of Rotary Friction Welded AISI 1045 and AISI 304 Steels: A Polynomial Model. In: 5th International Conference on Sensors, Materials and Manufacturing (ICSMM 2021), November 19-21, 2021, Virtual.

Hariadi, Sugeng and Candra, Susila and Soesanti, Arum (2019) Percepatan Pencapaian Kemandirian Desa Melalui Pendampingan Wirausaha Pembelajar (Studi Kasus di Desa Jogorepuh Kec. Pasrepan Kab. Pasuruan). In: Prosiding Temu Ilmiah Nasional Balitbang Tahun 2019, 31 September 2019, Batu.

Candra, Susila and Batan, I Made Londen and Pramono, Agus Sigit and Berata, Wajan (2017) Modeling of the minimum variable blank holder force based on forming limit diagram (FLD) in deep drawing process. In: International Conference on Informatics, Technology and Engineering 2017 (InCITE 2017), 24-25 August 2017, Bali, Indonesia.

Candra, Susila and Batan, I Made Londen and Berata, Wajan and Pramono, Agus Sigit (2014) Analytical study and FEM simulation of the maximum varying blank holder force to prevent cracking on cylindrical cup deep drawing. In: 12th Global Conference on Sustainable Manufacturing, 22nd – 24th of September 2014., Johor Bahru, Malaysia.

Pratiknyo, Yuwono Budi and Santoso, Amelia and Firmanto, Hudiyo and Tjandra, Sunardi and Haryono, Yon and Candra, Susila (2013) Sistem Pemadam Kebakaran Kendaraan Berpenumpang. In: Proceedings 7th National Industrial Engineering Conference 2013, 10 Oktober 2013, Surabaya.

Candra, Susila and Haryono, Yon and Linardauw, Orris Valentino (2010) Studi Pengaruh Paramater Proses Pengelasan Smaw Terhadap Kekuatan Sambungan Las Pada Material St42 Dengan Metode Responce Surface. In: Seminar Nasional Teknik Mesin 5, 25 Agustus 2010, Universitas Kristen Petra, Surabaya.

Siono, Andre Wibowo and Candra, Susila and Haryono, Yon (2010) Rancang Bangun Mesin Pemanas Sepatu Dengan Mekanisme Ban Berjalan Untuk Industri Kecil dan Menengah. In: Seminar Nasional Smart 2010, 29 Juli 2010, Universitas Gadjah Mada Yogyakarta.

Suteja, The Jaya and Candra, Susila and Yuniyanti, Therisia (2010) Optimasi Proses Reverse Engineering untuk Memodelkan Irregular Part Menggunakan Response Surface Methodology. In: Seminar Nasional Rsitek dan Teknologi Terapan, 16-17 Juni 2010, Universitas Katolik Atmajaya Jakarta.

Suteja, The Jaya and Candra, Susila and Yuniyanti, Therisia (2010) Optimasi Proses Reverse Engineering untuk Memodelkan Irregular Part Menggunakan Response Surface Methodology. In: Seminar Nasional Riset dan Teknologi Terapan (RITEKTRA) 2010, 16-17 Juni 2010, UNIKA ATMA JAYA JAKARTA.

Suteja, The Jaya and Candra, Susila and Yuniyanti, Therisia (2009) Optimization Of Reverse Engineering Process For Constructing Rotational Part Model Using Response Surface Methodology. In: 3rd INTERNATIONAL SEMINAR ON INDUSTRIAL ENGINEERING AND MANAGEMENT, December 10-11th, 2009, Bali.

Pratiknyo, Yuwono Budi and Candra, Susila and Hardiyanto, Eric G.Putra (2009) Pemanfaatan Lumpur Lapindo Sebagai Walol Filler Substance Pada Perancangan Modular Home Container. In: Seminar Nasional VIII Rekayasa dan Aplikasi Teknik Mesin di Industri, 24-25 November 2009, ITENAS Bandung.

Candra, Susila and Haryono, Yon and Anggrandi, Robin (2009) Perancangan Punch Die Produk Washer untuk Mereduksi Tahapan dan Efisiensi Proses. In: Seminar Nasional Teknik Mesin 4, 30 Juni 2009, Universitas Kristen Petra, Surabaya.

Candra, Susila and Witantyo, Witantyo and Djoenaedy, Aldo Rendra (2008) Studi Quenching Media pada proses Hardening Material Baja Paduan SKJ Mod. In: Seminar Nasional Teknik Mesin 3, 30 April 2008, Universitas Kristen Petra, Surabaya.

Suteja, The Jaya and Firmanto, Hudiyo and Haryono, Yon and Candra, Susila and Pratiknyo, Yuwono Budi and Tjandra, Sunardi (2005) Evaluating project-based design learning in Manufacturing Engineering University of Surabaya. In: The 6th Association of University of Asia and the Pasific (AUAP) General Conference, 4-8 September 2005, Surabaya.

Pratiknyo, Yuwono Budi and Candra, Susila (2004) Metode Pengukuran Tegangan Dan Regangan Menggunakan CAD/CAM/CAE Software: Study Komparasi Dengan Universal Testing Machine. In: Seminar Nasional Otomasi II The World of Automation 2004, 2-3 Desember 2004, Bandung.

Patent

Universitas Surabaya (2023) Alat Penahan Bakalan Pada Proses Penarikan Dalam Dengan Jarak Celah (Gap) Tetap Dan Dapat Diatur Secara Manual. IDS000005704.

Universitas Surabaya (2022) Progressive Web App Onthel. EC002022102178.

Universitas Surabaya (2022) Website Manajemen Order Onthel. EC002022102179.

Yayasan Universitas Surabaya (2021) Tas Ransel Delivery untuk Mengantarkan Barang dan Makanan. IDD000063490.