Items where Author is "Suteja, The Jaya"

Suteja, The Jaya (2024) Experimental Investigation of Infill Parameters Influence on Compressive Strength-to-Mass Ratio of PLA 3D Printed Part. Journal of Mechanical Engineering, 21 (1). pp. 45-59. ISSN 1823-5514; E-ISSN 2550-164X

Prasetyo, Hendra and Haryono, Yon and Suteja, The Jaya (2023) The Interaction Effect of CaCo3 Composition, Injection Temperature, and Injection Pressure on the Tensile Strength and Hardness of Recycled HDPE. Proceedings of the 4th International Conference on Informatics, Technology and Engineering 2023 (InCITE 2023), 21. pp. 159-167. ISSN 2589-4943

Suteja, The Jaya and Handoko, Rico and Soesanti, Arum (2023) Optimization of Infill Density, Layer Height, and Shell Thickness to Achieve Maximum Bending Strength and Minimum Printing Time of PLA 3D Printed Part. Jurnal Polimesin, 21 (5). pp. 1-5. ISSN 1693-5462; E-ISSN 2549-1199

Prawata, Andika Adzani and Tjandra, Sunardi and Suteja, The Jaya (2023) Optimizing Surface Quality And Processing Time Of 3d Printed Polylactic Acid Material For Rapid Tooling. Academic Journal Of Manufacturing Engineering, 21 (2/2023). pp. 80-85. ISSN 1583-7904

Wibisono, Vincent and Suteja, The Jaya and Firmanto, Hudiyo (2023) The Effect of Infill Angle and Build Orientation on the Impact Strength and Production Time of Porous Infill Structure. International Journal of Sustainable Transportation Technology, 6 (1). pp. 1-6. ISSN 2655-7975; E-ISSN 2620-4754

Evan, Michael and Suteja, The Jaya and Tjandra, Sunardi (2023) The Influence of Annealing Temperature and Holding Time Near Glass Transition Temperature on the Tensile Strength of Fused Deposition Modeling Printed Polylactic Acid. Jurnal Polimesin, 21 (1). pp. 25-28. ISSN 1693-5462[; e-ISSN 2549-1999

Wijayanto, Samuel Eluzai Yedija and Handoko, Rico and Noel, Jesslyne Chenia and Anggawirawan, Timotius William and Suteja, The Jaya (2022) Identifikasi Jenis Infill Pattern Pada Proses 3d Printing Yang Menghasilkan Hasil Cetak Dengan Kekuatan Tekan Dan Panjang Filamen Yang Optimal. Rekayasa Mesin, 13 (2). pp. 531-539. ISSN 2338-1663; E-ISSN 2477-6041

Suteja, The Jaya and Evan, Michael and Tjandra, Sunardi (2022) The Effect Of Thermal Annealing Between Glass Transition Temperature And Crystallization Temperature On Dimensional Accuracy Of 3D Printed Part. Media Mesin: Majalah Teknik Mesin, 23 (1). pp. 36-43. ISSN 1441 – 4348; E-ISSN: 2541 - 4577

Suteja, The Jaya and Evan, Michael and Tjandra, Sunardi (2022) The Effect Of Thermal Annealing Process Between Glass Transition Temperature And Crystallization Temperature On Dimensional Accuracy Of 3D Printed Part. Media Mesin: Majalah Teknik Mesin, 23 (1). pp. 36-43. ISSN 1441–4348; E-ISSN 2541-4577

Suteja, The Jaya (2021) Effect of Infill Pattern, Infill Density, and Infill Angle on the Printing Time and Filament Length of 3D Printing. Rekayasa Mesin, 12 (1). pp. 145-152. ISSN 2477-6041

Suteja, The Jaya and Firmanto, Hudiyo and Soesanti, Arum and Christian, Christian (2020) Properties investigation of 3D printed continuous pineapple leaf fiber-reinforced PLA composite. Journal of Thermoplastic Composite Materials, 35 (11). pp. 2052-2061. ISSN 0892-7057; E-ISSN 1530-7980

Suteja, The Jaya and Soesanti, Arum (2020) Mechanical Properties of 3D Printed Polylactic Acid Product for Various Infill Design Parameters: A Review. Journal of Physics: Conference Series, 1569 (042010). pp. 1-6. ISSN 1742-6588

Suteja, The Jaya and Hadiyat, Mochammad Arbi (2020) Optimization of Material Removal Rate and Dimensional Errors in Subtractive Rapid Prototyping of Polycarbonate Material. Materials Science Forum, 795. pp. 235-241. ISSN 662-9752

Suteja, The Jaya and Hadiyat, Mochammad Arbi (2019) Optimisation of Subtractive Rapid Prototyping Process Parameters using Response Surface Methodology. IOP Conference Series: Materials Science and Engineering, 703 ( 01202). pp. 1-6. ISSN 1757-8981

Suteja, The Jaya and Haryono, Yon and Harianto, Andri (2019) Optimization of Boring Process Parameters in Manufacturing of Polyacetal Bushing using High Speed Steel. E3S Web of Conferences, 130 (01031). pp. 1-7. ISSN 2267-1242

Suteja, The Jaya and Haryono, Yon and Harianto, Andri (2018) Optimization of Boring Process Parameters in Manufacturing of Polyacetal Bushing using High Speed Steel. International Conference on Automotive, Manufacturing, and Mechanical Engineering.

Suteja, The Jaya and Karim, Azarul and Yarlagadda, Prasad KDV and Yan, Cheng (2017) Estimating life cycle cost for a product family design: The challenges. In: International Conference on Informatics, Technology and Engineering 2017 (InCITE 2017), 24–25 August 2017, Bali, Indonesia.

Suteja, The Jaya (2016) The Influence of Depth of Cut, Feed Rate, and Step-over on Dimensional Accuracy in Subtractive Rapid Prototyping of Polycarbonate Material. In: 2016 International Symposium on Technologies in Manufacturing and Mechanical Engineering, 28-30 December 2016, Hong Kong. (In Press)

Suteja, The Jaya and Karim, Azarul and Yarlagadda, Prasad KDV and Yan, Cheng (2014) An Activity and Resource Advisory System for Manufacturing Process Chains Selection at the Early Stage of Product Development. Advanced Materials Research. pp. 1927-1931. ISSN 1662-8985

Suteja, The Jaya and Yarlagadda, Prasad KDV and Karim, Azarul and Yan, Cheng (2013) A Framework for Life Cycle Cost Estimation of a Product Family at the Early Stage of Product Development. Advanced Materials Research, 605. pp. 222-227. ISSN 1662-8985

Tjandra, Sunardi and Fang, Kang Ling and Suteja, The Jaya (2012) PERANCANGAN ULANG MESIN STUFFING RIBBON PADA PT. XYZ DENGAN METODE REVERSE ENGINEERING. Jurnal IPTEK - Media Komunikasi Teknologi, 16 (1). pp. 40-54. ISSN 1411-7010

Suteja, The Jaya (2011) The Effect of Mobile phone’s User Interface Configurations on User Comfort. v Proceeding of the 12 th International Conference on QiR (Quality in Research) Faculty of Engineering, University of Indonesia, Depok, Indonesia, 4 - 7 July 2011. pp. 749-752. ISSN 114 - 1284

Suteja, The Jaya and Tedjohartoko, Stephany (2011) The Influence of Mobile phone’s Forms in the User Perception. World Academy of Science, Engineering and Technology: International Journal of Industrial and Manufacturing Engineering, 5 (3). pp. 629-632.

Suteja, The Jaya (2010) Implementasi Metode Poke Yoke untuk Meningkatkan Usability dari Consumer Products. PROSIDING SEMINAR NASIONAL IX Rekayasa dan Aplikasi Teknik Mesin di Industri . ISSN 693 - 3168

Suteja, The Jaya and Candra, Susila and Yuniyanti, Therisia (2010) Optimasi Proses Reverse Engineering untuk Memodelkan Irregular Part Menggunakan Response Surface Methodology. In: Seminar Nasional Rsitek dan Teknologi Terapan, 16-17 Juni 2010, Universitas Katolik Atmajaya Jakarta.

Suteja, The Jaya and Candra, Susila and Yuniyanti, Therisia (2010) Optimasi Proses Reverse Engineering untuk Memodelkan Irregular Part Menggunakan Response Surface Methodology. In: Seminar Nasional Riset dan Teknologi Terapan (RITEKTRA) 2010, 16-17 Juni 2010, UNIKA ATMA JAYA JAKARTA.

Suteja, The Jaya and Candra, Susila and Yuniyanti, Therisia (2009) Optimization Of Reverse Engineering Process For Constructing Rotational Part Model Using Response Surface Methodology. In: 3rd INTERNATIONAL SEMINAR ON INDUSTRIAL ENGINEERING AND MANAGEMENT, December 10-11th, 2009, Bali.

Suteja, The Jaya and Wijaya, Maryadi (2009) Analisis Performansi Perangkat Lunak Bebas Computer Aided Manufacturing Guna Meningkatkan Produktivitas Proses Manufaktur. In: Seminar Nasional - VIII Rekayasa dan Aplikasi Teknik Mesin di Industri, 24-25 November 2009, Bandung.

Pratiknyo, Yuwono Budi and Suteja, The Jaya and Suantoro, Harta Dharma (2009) Perancangan Modular Home Container. In: Seminar Nasional VIII Rekayasa dan Aplikasi Teknik Mesin di Industri, 24-25 November 2009, ITENAS Bandung.

Damayanti, Febri and Rudiono, Lisabella Novarina and ., Deby and Wujaya , Stefanus and Suteja, The Jaya (2009) Studi Pengaruh Strategi Pemesinan terhadap Kekasaran Permukaan pada Proses Pocketing Material ST 42. In: Digital Prosiding: Seminar Nasional Tahunan Teknik Mesin (SNTTM)–VIII, 11-14 Agustus 2009. Jurusan Teknik Mesin Universitas Diponegoro, Semarang, pp. 222-225. ISBN 978-979-704-772-6

Suteja, The Jaya (2009) APPLICATION OF FUZZY MULTIPLE ATTRIBUTE GROUP DECISION MAKING METHOD IN STRETCHER CONCEPT SELECTION. In: The 6th International Conference on Numerical Analysis in Engineering (NAE2009), May 15th-16th, 2009, The Jayakarta Lombok Hotel, Mataram, Lombok. (Unpublished)

Suteja, The Jaya and Candra, Susila and Aquarista, Yudistira (2008) Optimasi Proses Pemesinan Milling Fitur Pocket Material Baja Karbon Rendah Menggunakan Response Surface Methodology. Jurnal Teknik Mesin, 10 (1). pp. 1-7. ISSN 1410-9867

Suteja, The Jaya (2008) IMPLEMENTASI REVERSE ENGINEERING DALAM MENINGKATKAN PRODUKTIVITAS PROSES DESAIN PRODUK PERHIASAN. In: Prosiding Seminar Nasional Sains dan Teknologi II 2008: Peran Strategis Sains dan Teknologi Pasca 100 tahun Kebangkitan Nasional. Lembaga Penelitian Universitas Lampung, Lampung, pp. 157-165. ISBN 978-979-1165-74-7

Suteja, The Jaya and Tjandra, Sunardi (2006) ANALISIS FLEXIBLE ASSEMBLY LINE DENGAN MELAKUKAN VIRTUAL PROTOTYPING. Prosiding Seminar Nasional Tenaga Listrik dan Mekatronika. pp. 387-390. ISSN 979-26-2441-1

Tjandra, Sunardi and Suteja, The Jaya (2006) Verifikasi Produk Mekatronik dengan menggunakan Virtual Prototype: Studi Kasus Perancangan Mekanisme Alat Pemotong Adonan Cracker. Prosiding Seminar Nasional Tenaga Listrik dan Mekatronik. pp. 393-397. ISSN 979-26-2441-4

Suteja, The Jaya and Pratiknyo, Yuwono Budi and Tjandra, Sunardi (2005) Development of information technology assisted learning for improving the quality of learning in product design. In: The 6th Association of University of Asia and the Pasific (AUAP) General Conference, 4-8 September 2005, Surabaya.

Suteja, The Jaya and Firmanto, Hudiyo and Haryono, Yon and Candra, Susila and Pratiknyo, Yuwono Budi and Tjandra, Sunardi (2005) Evaluating project-based design learning in Manufacturing Engineering University of Surabaya. In: The 6th Association of University of Asia and the Pasific (AUAP) General Conference, 4-8 September 2005, Surabaya.